Spec Sheet
VS-611DT
6x1:2 4K60 4:2:0 HDMI Auto Switcher and
PoE Provider over HDBaseT
|HDMI |Ethernet-RJ-45 |HDCPCompliant
|HDBaseT |4K/60UHD(4:2:0)
VS−611DT is a high−performance automatic switcher
for HDMI video signals with resolution up to 4K@60Hz
(4:2:0). With six HDMI inputs, the unit can
automatically or manually switch to a predefined or
last connected input whenever the currently active
video signal is interrupted or whenever a
higher−priority video signal is introduced. The output
signal is distributed to HDBaseT and HDMI 4K@60Hz
(4:2:0) outputs
FEATURES
Max. Data Rate-8.91Gbps (2.97Gbps per graphic channel)
Max. Resolution-4K@60Hz (4:2:0) and WUXGA
HDTV Compatible
HDCP Compliant-Works with sources that support HDCP repeater mode
HDMI Support-Deep Color, Ethernet, ARC, 7.1 PCM
Customized Audio Output-De−embed the audio from the HDMI input and route it to the balanced
stereo audio line out, or de−embed HDMI ARC from the output and route it to the balanced stereo
audio line out
Features Kramer reKlocking™ Technology-Rebuilds the digital signal to travel longer distances
Step-in Master Support
Auto-Power Off-When no HDMI input for 30 seconds (selectable)
Automatic Input Detection & Selection
HDCP On/Off Switching
EDID Configuration Options
Selectable Switching-Manual or fast auto−switching according to last connected or preset priority
Full HDBaseT Certification-Including bidirectional RS−232, Ethernet, IR and POE
HDBaseT Extended Reach-Up to 100m at 4K@60Hz (4:2:0)
POE Source for HDBaseT Receivers
Contact Closure-For remote manual switching override
Firmware Upgrade-Over mini−USB, RS−232 or RJ−45 Web page
Varied Control Options-Front panel keyboard, HDBaseT Ethernet, RS−232 local and over HDBaseT,
IR
Built-in Web Server
Software Support-For Protocol 3000, K−Router Plus, EDID Designer, K−Upload