Manual

 6
 Getting to Know Your VS-101AV Switcher
The Kramer VS-101AV is a high quality mechanical 10x1 switcher for composite video and stereo audio
signals. It is designed for applications requiring an unpowered rack mountable unit for routing of video and
stereo audio signals. Audio is always switched together with the corresponding video signal, and unselected
video inputs terminate into a 75-ohm resistor. High quality switching components provide excellent isolation
between inputs. The VS-101AV is extremely rugged and dependable. Its unpowered, passive design can be an
advantage in applications where various regulatory compliances would otherwise be required. The “ hard-wire”
signal path offers excellent bandwidth, and can also switch other signal formats. Due to the mechanical mode of
operation, the machine can be used “ backwards” – functioning as a 1x10 switcher.
Front/rear panel features of the VS-101AV are described in Figure  and Table 2.

Figure : VS-101AV Front/Rear Panel Features
Table 2: VS-101AV Front/Rear Panel Features
No.
Feature
Function
1.
INPUT SELECTOR (1-10) pushbuttons Selects the Video/Audio source input (1-10) to be
switched to the output.
2.
AUDIO OUT The AUDIO OUT RCA connectors (Right and Left)
3.
AUDIO INPUTS (1-10) 10 Stereo Audio inputs on RCAs.
4.
VIDEO OUT The VIDEO OUT BNC connector
5.
VIDEO INPUTS (1-10) 10 Video inputs on BNCs.