User's Manual

Kramer Electronics Ltd.
VM-3DT - Protocol 3000
19
Protocol 3000 Commands
This section includes the following commands:
• System Commands on page 19
• EDID Handling Commands on page 24
System Commands
Command
Description
#
Protocol handshaking (system mandatory)
BUILD-DATE
Get device build date (system mandatory)
FACTORY
Reset to factory default configuration
HELP
Get command list (system mandatory)
MODEL
Get device model (system mandatory)
PROT-VER
Get device protocol version (system mandatory)
RESET
Reset device (system mandatory)
SN
Get device serial number (system mandatory)
DISPLAY
Get output HPD status
NAME
Set/get machine (DNS) name (system – Ethernet)
SIGNAL
Get input signal lock status (system)
HDCP-STAT
Get HDCP signal status
#
Functions
Permission
Transparency
Set:
#
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Protocol handshaking
#CR
Get:
-
-
Response
~nn@SPOKCR LF
Notes
Validates the Protocol 3000 connection and gets the machine number
Step-in master products use this command to identify the availability of a device
K-Config Example
“#”,0x0D
BUILD-DATE
Functions
Permission
Transparency
Set:
-
-
-
Get:
BUILD-DATE?
End User
Public
Description
Syntax
Set:
-
-
Get: Get device build date
#BUILD-DATE?CR
Response
~nn@BUILD-DATESPdateSPtimeCR LF
Parameters
date – Format: YYYY/MM/DD where YYYY = Year, MM = Month, DD = Day
time
– Format:
hh:mm:ss
where
hh
= hours,
mm
= minutes,
ss
= seconds
K-Config Example
“#BUILD-DATE?”,0x0D