Quick Start Guide

VA-14 Quick Start
P/N:
29 0 0 - 3 0 1 2 7 1 QS
Rev:
2
Scan for full manual
VA-14 Quick Start Guide
This guide helps you install and use your VA-14 for the first time.
Go to www.kramerav.com/downloads/VA-14 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VA-14 4x1 Balanced Audio Mixer
4 Rubber feet
1 Power supply (12V DC)
1 Quick start guide
Step 2: Get to know your VA-14
VA-14 Front and Back Panels:
#
Feature
Function
1
POWER Switch
Illuminated switch for turning the unit ON or OFF.
2
PHONES OUT 6.5mm Connector
Connect to the headphone set.
3
PHONES LEVEL Potentiometer
Use to adjust the headphone volume.
4
MASTER LEVEL Potentiometer
Use to adjust the combined signals from all inputs mixed to the output (from 1 to 2).
5
INPUT LEVEL Potentiometer
Use to adjust the input level (from 1 to 4).
6
INPUT XLR Female Connectors
Connect to the audio source (from 1 to 4).
7
OUT XLR Male Connectors
Connect to the audio acceptor (from 1 to 2).
8
12V DC
Connect to the 12V power supply.
VA-14 Underside:
#
Feature
Function
1
INPUT
(from 1 to 4)
PHANTOM
Set to ON to select a phantom microphone. Set to OFF to select a dynamic microphone.
2
LEVEL
Set to MIC to select a microphone level input. Set to LINE to select a LINE level input.
3
OUT LEVEL
Set to MIC to select a microphone level output. Set to LINE to select a LINE level output
(from 1 to 2).