Spec Sheet

TP-580TD

4K60 4:2:0 DVI HDCP 2.2 Transmitter with

RS−232 & IR over Long−Reach HDBaseT

|DVI |HDCPCompliant |HDBaseT

|4K/60UHD(4:2:0) |HDCP2.2Compatible

TP−580TD is a high−performance, long−reach

HDBaseT transmitter for 4K@60Hz (4:2:0) HDMI,

RS−232 and IR signals over twisted pair, via

single−link DVI−I connection. The TP−580TD converts

all input signals into the transmitted HDBaseT signal.

It extends video signals to up to 40m (130ft) over CAT

copper cables at up to 4K@60Hz (4:2:0) 24bpp video

resolution and provides even further reach for lower

HD video resolutions

FEATURES

High Performance Standard Extender-Professional HDBaseT extender for providing long−reach

signals over twisted−pair copper infrastructures. TP−580TD is a standard extender that can be

connected to any market−available HDBaseT−compliant extension product. For optimum extension

reach and performance, use recommended Kramer cables

Secured Operation-Highly−secured operation is ensured by lockable wiring connectivity with

protection against unintentional cable disconnection

HDMI Signal Extension-HDCP 2.2 compliant, via single−link DVI−I connection. Supports deep color,

x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS−HD, 2K, 4K, and 3D

as specified in HDMI 2.0. EDID signals are passed through from the source to the display

I−EDIDPro™ Kramer Intelligent EDID Processing™-Intelligent EDID handling, processing and

pass−through algorithm that ensures Plug and Play operation for HDMI source and display systems

Multi−channel Audio Extension-Up to 32 channels of digital stereo uncompressed signals for

supporting studio−grade surround sound

Bidirectional RS−232 Extension-Serial interface data flows in both directions, allowing data

transmission and device control

Bidirectional Infrared Extension-IR interface data flows in both directions, allowing remote control of

peripheral devices located at either end of the extended line

Cost-effective Maintenance-Status LED indicators for DVI and HDBT ports facilitate easy local

maintenance and troubleshooting

Easy Installation-Compact DigiTOOLS® fan−less enclosure for dropped−ceiling mounting, or

side−by−side mounting of 3 units in a 1U rack space with the recommended rack adapter



PAGE 1
TP-580TD 4K60 4:2:0 DVI HDCP 2.2 Transmitter with RS−232 & IR over Long−Reach HDBaseT | DVI | HDCP Compliant | HDBaseT | 4K/60 UHD (4:2:0) | HDCP 2.2 Compatible TP−580TD is a high−performance, long−reach HDBaseT transmitter for 4K@60Hz (4:2:0) HDMI, RS−232 and IR signals over twisted pair, via single−link DVI−I connection. The TP−580TD converts all input signals into the transmitted HDBaseT signal.
PAGE 2
TECHNICAL SPECIFICATIONS Inputs 1 DVI-D On a DVI−I female connector Outputs 1 HDBaseT On an RJ−45 female connector Ports 1 IR On a 3.5mm mini jack for IR link extension 1 RS−232 On a 9−pin D−sub connector for serial link extension and device firmware upgrade Extension Line Compliance HDBaseT 1.0 Up to 40m (130ft) At 4K@60Hz (4:2:0) (When using Kramer HDBaseT cables) Up to 70m (230ft) At full HD (1080p @60Hz 36bpp) (When using Kramer HDBaseT cables) Video Max. Data Rate 10.2Gbps (3.
PAGE 3