Spec Sheet

TP-575
1:2 Twisted Pair & HDMI Line Driver &
Distribution Amplifier
|HDMI |HDCPCompliant |DGKat |KramerCore
The TP−575 is a DGKat™ twisted pair line driver for
HDMI over twisted pair signals. The unit receives a
twisted pair signal and outputs both an HDMI and
twisted pair signal to a compatible receiver
FEATURES
Max. Data Rate-4.95Gbps (1.65Gbps per graphic channel)
HDTV Compatible
HDCP Compliant
DGKat™ Signal Integration-Kramer’s unique technology for converting TMDS as well as control and
communication to signals that run over twisted pair cables
HDMI Support-x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD
3D Pass-Through
EDID PassThru-Passes EDID signals between the source and display
HPD Pass-Through-Passes Hot Plug Detect signals from display to source
Active Input/Output LED Indicators
System Range-Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using
Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and
display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to
the connectors for the products to function properly
Compatible Receivers-PT−572+, TP−574, TP−575, TP−576
Output Signal Reclocking-Daisy chains up to 6 receivers for maximum range of 600m using shielded
Kramer CAT 7 cable at 1080i. (For other cables and resolutions, see System Range above.)
Power Connect™ System-A single connection to the TP−575 powers the transmitter, receiver and
line driver units
Compact MegaTOOLS™-2 units can be rack mounted side−by−side in a 1U rack space with the
recommended rack adapter
