Spec Sheet

TP-121xl

Computer Graphics Video & Stereo Audio

over Twisted Pair Transmitter

The TP-121xl is a high-performance twisted pair

transmitter for computer graphics video and

unbalanced stereo audio signals. It converts the input

signals to a twisted pair signal and transmits them

over CAT 5 cable to a compatible receiver

FEATURES

Max. Resolution-WUXGA & 1080p

HDTV Compatible

EDID Capture-Captures EDID from the display or uses pre−programmed default EDID

Interference Protection-Increased level of protection against noise, spikes and interference in

adverse environments

System Range-More than 250m (more than 820ft)

Cable-UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5

Power Connect™ System-A single connection to the transmitter or the receiver powers both units

when the devices are within 60m (200ft) of each other



PAGE 1
TP-121xl Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter The TP-121xl is a high-performance twisted pair transmitter for computer graphics video and unbalanced stereo audio signals. It converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a compatible receiver FEATURES Max.
PAGE 2
TECHNICAL SPECIFICATIONS INPUTS: 1 VGA on a 15−pin HD connector; 1 unbalanced stereo audio on a 3.5mm mini jack OUTPUT: 1 twisted pair on an RJ−45 connector RESOLUTION: Up to WUXGA and 1080p AUDIO BANDWIDTH (-3dB): 20Hz to 20kHz @−3dB AUDIO S/N RATIO: 84dB TOTAL GAIN: Audio: Analog/analog: 0dB; Analog/SPDIF: –12dBFS COUPLING: AC THD+N: Audio:<0.02% POWER CONSUMPTION: 12V DC, 190mA (370mA when powering both devices) INCLUDED ACCESSORIES: Power supply Product Dimensions 12.00cm x 7.