Spec Sheet

PT-571
HDMI HDCP 2.2 Compact Transmitter over
PoC Long−Reach DGKat
|HDMI |HDCPCompliant |DGKat |KramerCore
|HDCP2.2Compatible
The PT−571 is a DGKat™ twisted pair transmitter for
HDMI signals. The PT−571 converts an HDMI signal to
a single twisted pair signal and the PT−572+ converts
the twisted pair signal back to an HDMI signal
FEATURES
Max. Data Rate-4.95Gbps (1.65Gbps per graphic channel)
HDTV Compatible
HDCP Compliant
DGKat™ Signal Integration-Kramer’s unique technology for converting TMDS as well as control and
communication to signals that run over twisted pair cables
HDMI Support
3D Pass-Through
System Range-Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using
Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and
display used. If using third–party shielded CAT cables, both ends of the shield must be soldered to
the connectors for the products to function properly
EDID PassThru-Passes EDID signals between the source and display
Status LED-Lights red when receiving power only, orange when output and power are attached, and
yellow when both an active input and output are attached
Power Connect™ System-A single connection to the transmitter powers the receiver
Ultra-Compact Pico TOOLS™-4 units can be rack mounted side−by−side in a 1U rack space with the
recommended rack adapter
