System Guide

Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your PA-120Z / PA-240Z. For best results, we
recommend that you always use Kramer high-performance cables to connect AV equipment to the PA-120Z /
PA-240Z.
RJ-45 Pinout:
PIN EIA /TIA 568B
PIN
Wire Color
PIN
Wire Color
1
Orange / White
5
Blue / White
2
Orange
6
Green
3
Green / White
7
Brown / White
4
Blue
8
Brown
Connect the audio line out:
Connect the audio line-in:
to a balanced stereo audio
acceptor:
to an unbalanced stereo
audio acceptor:
To a balanced stereo
audio source:
To an unbalanced stereo
audio source:
Step 5: Connect power
Connect the power cord to PA-120Z / PA-240Z and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
• Touching uninsulated terminals or wiring may result in an unpleasant sensation.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
• Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
• To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the bottom of the unit.