Manual

Mounting Device – Contents
i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Recycling Kramer Products 2
3 Overview 3
4 Defining the Mounting Device 4
5 Installing the Mounting Device 5
5.1 Attach the wall bracket to a concrete or stud wall 5
5.2 Slide the Cover over the Wall Bracket 6
5.3 Attach the Foam Pads to the Adjustment Clamps 7
5.4 Attach the Platform to the Wall Bracket 8
5.5 Attach the Speaker to the Platform 8
5.6 Set the Tilt 10
6 Technical Specifications 11
Figures
Figure 1: Mounting Device Active 2-Way, Bi-Amplified Studio-Grade Speaker 4
Figure 2: Attaching the Bracket to a Concrete Wall 5
Figure 3: Attaching the Bracket to a Wood/Stud Wall 6
Figure 4: Sliding the Cover over the Wall Bracket 6
Figure 5: Attaching the Foam Pads 7
Figure 6: Attaching the Speaker Platform to the Wall Bracket 8
Figure 7: Attaching the Speaker to the Platform 8
Figure 8: Securing the Speaker 9
Figure 9: Setting the Tilt 10
Figure 10: Dimensions 11