Spec Sheet

NEW PRODUCT DIRECTORY 2018
7
VP-778 is a presentation matrix switcher/scaler that can be congured as a single 4K output
(4K@30Hz UHD [3840x2160]) or dual HD scaler with full PiP capabilities. It can scale to two
independent HDMI outputs, each with a parallel HDBaseT output. VP-778 includes both
analog and embedded audio inputs and outputs and audio DSP features. It also features two
microphone inputs and digital & analog balanced stereo and amplied speaker outputs. VP-778
can be controlled using built-in web pages, RS-232 and IR.
VP-778 8−Input Presentation Matrix Switcher/Scaler with Seamless Video
Cuts and 4K30 Output Support
FEATURES
● Pix Perfect™ Scaling - State-of-the-art Kramer technology.
● K-IIT XL™ Picture-in-Picture Image Insertion Technology - Ultra-stable picture-in-picture, picture-
and-picture and split-screen.
● Seamless Video Switching - Swap or follow (transition type) and cut or fade (transition eect).
● Dual Scalers - “Live” seamless transitions with two independent outputs.
● 8 Input Buttons per Channel.
● Main and PiP Window Customization - In overlay mode.
● Projection Setups - Front, back, ceiling front and ceiling back.
● Output Resolutions - Up to 4K@30Hz UHD (3840x2160) in single-window mode, HDTV and
computer graphics resolutions with selectable refresh rates.
● Inputs - Choice of HDMI, VGA, YUV, or CV on two DVI-U inputs, 4 HDMI and 2 HDBaseT inputs.
● Two Programmable User Buttons - For passing serial commands.
● Serial Comms Matrix - Up to eight sets of congurable unidirectional connections for passing serial
data from source to destination.
● HDBaseT™ Technology - Max. data rate of 6.75Gbps (2.25Gbps per graphic channel).
● System Range (HDBaseT™) - Up to 130m (430ft) in normal mode; up to 180m (590ft) in ultra-mode
(1080p @60Hz @24bpp) when using BC-UNIKAT cables.
● Cables - For optimum range and performance, use the recommended Kramer cables available at
www.kramerav.com/product/VP-778.
● Audio - Balanced stereo audio inputs, two microphone inputs, digital stereo and balanced stereo
outputs, input/output audio level adjustment, and audio DSP.
● Built-in 2x10W Power Amplier - Speaker outputs on a 4-pin terminal block connector.
● Microphone - Talkover or mix modes.
● Auto Switching - Automatically scans inputs based on a predened priority and selects rst live
input found or last connected.
● Audio-Follow-Video (AFV) & Breakaway.
● Advanced De-interlacing - 3D comb ltering, lm mode, diagonal correction, and motion detection.
● Multiple Aspect Ratio Selections.
● Built-in Proc-Amp - With enhanced functions such as color correction, gamma, dither, and noise
reduction.
● Power Management Modes - Save energy and money.
● HDCP Compliance.
● Luma- and Chroma-Keying.
● Advanced EDID Management - Native resolution and color depth modeline per input.
● Built-in Test Patterns - For screen setup and alignment.
● Output EDID Analysis - For optimal scaling.
● Input & Output Color Space Control.
● HDMI Deep Color.
● On-Screen Display (OSD) - Provides easy setup and adjustment.
● Non-Volatile Memory - Retains settings.
● Firmware Upgrade Input - Via USB memory stick.
● Various Control Options - Front panel buttons, Ethernet web page, RS-485, IR, RS-232 serial
commands transmitted by a touch screen system, PC, or other serial controller.
● Standard 19" (1U). Rack "ears" included.