Spec Sheet
NEW PRODUCT DIRECTORY 2018
41
WXA-H1/US is a passive wall plate that includes
the following inputs: 15-pin HD, 3.5mm Audio,
& HDMI.
WXA-H1/US Passive Pass−through Wall Plate − 15−pin HD, 3.5mm Audio, & HDMI
FEATURES
● Front Panel Connections - 15-pin HD (F), HDMI (F) and 3.5mm (F).
● Rear Panel Connections - 15-pin HD (F), HDMI (F) and 3.5mm (F).
● EDID PassThru - Passes EDID signals from source to display.
● Size - Available in 1 gang US only.
● Keystone connectors (no pigtail).
WXA-HU/US is a passive wall plate that includes
the following inputs: 15-pin HD, 3.5mm Audio,
HDMI & USB.
WXA-HU/US Passive Pass−through Wall Plate − 15−pin HD, 3.5mm Audio, HDMI & USB
FEATURES
● Front Panel - 15-pin HD (F), HDMI (F), USB (F) and 3.5mm (F).
● Rear Panel Connections - 15-pin HD (F), HDMI (F), USB (F) and 3.5mm (F).
● EDID PassThru - Passes EDID signals from source to display.
● Size - Available in 1 gang US only.
● Keystone connectors (no pigtail).
RTBUS-24 is an elegant furniture-mounted,
round connection bus that is easily installed
into a table or podium top. The unit enables
powering and charging devices and connecting
a device to the room's presentation system
through HDMI.
RTBUS-24 Round Table Connection Bus − 2 US Power Sockets & 2 USB Chargers
FEATURES
● Power and Video Inputs - 2 US power sockets, 2 USB charging ports, and 1 HDMI connector.
● Dual USB Charger - 3.6A max power enables charging 2 iPads/tablets simultaneously.
● Pneumatic Lid - For lifting and smooth closing.
● Available Colors - Black or silver, sand-blasted, textured top.
● Power Input - 110V AC (USA only).
● Cutout Diameter Range - 111mm to 114mm (4.37in to 4.49in).
TBUS-204 is a furniture-mounted pop-up connection
bus that is easily installed into a table or podium
top. TBUS-204 includes 2 US power sockets and 2
USB charging ports.
TBUS-204 Pop−up Table Connection Bus − 2 US Power Sockets & 2 USB Chargers
FEATURES
●
Pneumatic Lift - Easy opening & closing by pressing down gently on the cover. When not in
use, it lowers ush with the table.
●
Elegant and Rugged Rectangular Design - The sturdy and attractive anodized aluminum
enclosure provides maximum connectivity in the smallest possible footprint, and at the same
time is cost eective and easy to install.
● Installation - Requires tools and expertise to cut a 21.2cm x 12.2cm (8.4” x 4.8”) rectangular
hole in the surface of the furniture. Maximum table thickness is 7.6cm (3").
● Available Colors - Black or silver, sand-blasted, textured top.