Quick Start Guide

Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your 102MX.
To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/102MX.
Using third-party cables may cause damage!
Step 5: Connect power
Connect the power cord to 102MX and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
• For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
• There are no operator serviceable parts inside the unit.
Warning:
• Use only the power cord that is supplied with the unit.
• Disconnect the power and unplug the unit from the wall before installing.
Step 6: Operate 102MX
Using a Microphone:
1. Connect the microphone to the MIC/LINE 1 IN connector.
2. Press the COND. MIC button to use a powered condenser microphone.
Release the COND. MIC button to use an unpowered dynamic
microphone.
3. Press the MIC SELECT button.
Using the Talk-Over Function:
Press the TALK OVER button.
102MX automatically inserts the mic signal and fades
the source of LINE 2 IN. The unit becomes a fader
instead of a mixer.
Technical Specifications
Inputs:
Mic/line 1: 10mV/1.6kΩ, 1Vpp/10kΩ, on 6.5mm phone connector;
Line 2: 1Vpp/10kΩ, stereo on RCA connectors
Outputs:
Line level, stereo, up to 5.6Vpp/150Ω on RCA connectors
Bandwidth (-3db):
100kHz
Gain Range:
−12dB to 68.5dB (mic); −12dB to +8.8dB (line)
Diff. Phase:
0.05Deg.
S/N Ratio:
69dB
Control:
Mic/line 1 level, line 2 level, master level rotary controls, condenser/dynamic mic, line/mic, talkover selection switches
Audio THD+Noise:
0.018%
2nd Harmonic:
0.002%
Power Consumption:
12V DC, 40mA
Operating Temperature:
0° to +40°C (32° to 104°F)
Storage Temperature:
-40° to +70°C (-40° to 158°F)
Humidity:
10% to 90%, RHL non-condensing
Dimensions:
12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
Weight:
0.25kg (0.55lbs) approx.
Accessories:
Power supply, mounting bracket
Specifications are subject to change without notice at www.kramerav.com.