Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Technical Specifications

7.3.2 Recalling a Setting

To recall a setting, do the following:

1. Press the RCL button. The RCL button flashes.

2. Press the Output #. The LED Output display # flashes

, displaying what was

previously stored.

3. Press the RCL button again. This recalls the stored data.

By design

, you cannot recall data that is stored in a particular unit from a

different unit. Each unit, even when set to the IN SYSTEM mode, stores its

own data separately.

7.3.3 Locking and Unlocking Settings

The PC includes a flexible locking

mechanism to safeguard settings on the

switchers. To prevent changing the settings accidentally

, lock your

switchers. Unlocking releases

the protection mechanism.

From the PC you can lock and unlock the following:

 A specific switcher

 All switchers

Table 6: Push Button Sequence Summary

Lock Unlock

Specific Switcher

TAKE + MACHINE IN SYSTEM # + STO TAKE + MACHINE IN SYSTEM # + RCL

All Switchers

TAKE + ALL + STO TAKE + ALL + RCL

8 Technical Specifications

Table 7, Table 8, and Table 9 list the technical specifications for the 88

Series switchers.

1 At this stage, pressing a different # changes the Output #

2 On one occasion the same unit can function in the standalone mode, and on another occasion in the IN SYSTEM mode

3 Locking means that the front panel is locked. The switcher still operates via the PC

4 Especially if the system is complex and the switchers are stored on a rack in another room

5 Restarting a switcher also releases the protection mechanism (without wiping out the switcher settings)