Owner manual
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operation
22
7.2 Setup Information
This section describes setup capacity, switching the power on, timeout and
the system settings.
7.2.1 Setting DIP-Switches
Each 88 Series switcher includes a rear panel set of six DIP-switches, as
Figure 12, Table 4 and Table 5 define.
Figure 12: Rear Panel DIP-switches
Table 4: Rear Panel DIP-switches
DIP-switch # Function:
1-4 Set the MACHINE NUMBER (refer to Table 5)
5 Disables use of the IN SYSTEM button
(OFF = enables the IN SYSTEM button; ON = disables the IN SYSTEM button)
6 Enables a reply from the unit after it receives an RS-232 / RS-485 command
(OFF = disables reply
1
;ON = enables reply)
Table 5: Machine # DIP-switch Settings
DIP-SWITCH MACHINE #
1 2 3 4
1 OFF
ON ON ON
2 ON OFF
ON ON
3 OFF
OFF
ON ON
4 ON ON OFF
ON
5 OFF
ON OFF
ON
6 ON OFF
OFF
ON
7 OFF
OFF
OFF
ON
8 ON ON ON OFF
1 Helpful, for example, when using three composite video switchers to form one component video switcher