User Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
10.1 Changing the Device Parameters 22
10.2 Updating the VS-88SDI Firmware 25
11 Kramer Protocol 3000 26
11.1 Switching Protocols 26
11.2 Kramer Protocol 3000 Syntax 27
11.2.1 Host Message Format 27
11.2.1.1 Simple Command 27
11.2.1.2 Command String 27
11.2.2 Device Message Format 27
11.2.2.1 Device Long Response 27
11.2.3 Command Terms 28
11.2.4 Entering Commands 28
11.2.5 Command Forms 29
11.2.6 Command Chaining 29
11.2.7 Maximum String Length 29
11.2.8 Backward Support 29
11.3 Kramer Protocol 3000 Commands 30
11.3.1 Device Initiated Messages 30
11.3.2 Result and Error Codes 30
11.3.3 Basic Routing Commands 30
11.3.4 Preset Commands 31
11.3.5 Operation Commands 31
11.3.6 Machine Information Commands 31
11.3.7 Identification Commands 32
11.3.8 Network Setting Commands 32
12 Hex Table (Protocol 2000) 33
13 Kramer Protocol 2000 34
Figures
Figure 1: VS-88SDI 8x8 SDI Matrix Switcher 5
Figure 2: Connecting the VS-88SDI 8x8 SDI Matrix Switcher 10
Figure 3: DIP-Switch Settings 12
Figure 4: Local Area Connection Properties Window 14
Figure 5: Internet Protocol (TCP/IP) Properties Window 15
Figure 6: Connect Screen 16
Figure 7: Device Properties Screen 17
Figure 8: P3K Wizard Screen 23
Figure 9: Connect Window 24
Figure 10: Device Properties Window 25