Owner manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer Protocol 2000
40
INSTRUCTION DEFINITION FOR SPECIFIC INSTRUCTION
# DESCRIPTION INPUT OUTPUT
NOTE
16 ERROR / BUSY For invalid / valid input (i.e.
OUTPUT byte = 4 or
OUTPUT byte = 5),
this byte is set as the input
#
0 - error
1 - invalid instruction
2 - out of range
3 - machine busy
4 - invalid input
5 - valid input
9, 25
17 RESERVED - - 10
18 RESET AUDIO 0 0 1
19 STORE AUDIO STATUS Set as SETUP # 0 - to store
1 - to delete
2, 3
20 RECALL AUDIO STATUS Set as SETUP # 0 2, 3
21 SET VIDEO PARAMETER Equal to input / output
number whose video
parameter is to be set
(0 = all)
Set as parameter value 2, 11, 24
22 SET AUDIO PARAMETER Equal to input / output
number whose parameter
is to be set
(0 = all)
Set as parameter value 2, 11, 24
23 INCREASE / DECREASE VIDEO
PARAMETER
Equal to input / output
number whose video
parameter is to be
increased / decreased
(0 = all)
0 - increase video gain
1 - decrease video gain
2 - increase contrast
3 - decrease contrast
4 - increase brightness
5 - decrease brightness
6 - increase colour
7 - decrease colour
8 - increase hue
9 - decrease hue
16 - increase H-phase
17 - decrease H-phase
18 - increase V-position
19 - decrease V-position
24
24 INCREASE / DECREASE AUDIO
PARAMETER
Equal to input / output
number whose parameter
is to be increased /
decreased
(0 = all)
0 - increase output
1 - decrease output
2 - increase left output
3 - decrease left output
4 - increase right output
5 - decrease right output
6 - increase input
7 - decrease input
8 - increase left input
9 - decrease left input
10 -increase right input
11 - decrease right input
24
25 REQUEST AUDIO PARAMETER Equal to input / output
number whose parameter
is requested
0 6, 24
26 REQUEST VIDEO PARAMETER Equal to input / output
number whose video
parameter is requested
0 6, 24
30 LOCK FRONT PANEL 0 - Panel unlocked
1 - Panel locked
0 2
31 REQUEST WHETHER PANEL
IS LOCKED
0 0 16
32 to
35
RESERVED - - 10
40 DIRECT MEMORY SAVE Memory address Data 20
42 AUDIO PARAMETER
SETTINGS FOR
INSTRUCTIONS 22, 24, 25
INPUT Bit:
I0=input; 1=output
I1 - Left
I2 - Right
0 - Gain
1 - Bass
2 - Treble
3 - Midrange
4 - Mix On
24