User manual

Operating the VS-88H 8x8 HDMI Matrix Switcher

7.5 Controlling via ETHERNET

You can connect the VS-88H via the Ethernet, using a crossover cable (see

section

7.5.1) for direct connection to the PC or a straight through cable (see

section

7.5.2) for connection via a network hub or network router

7.5.1 Connecting the ETHERNET Port directly to a PC (Crossover

Cable)

You can connect the Ethernet port of the VS-88H to the Ethernet port on

your PC, via a crossover cable with RJ-45 connectors.

This type of connection is recommended for identification of the factory default

IP Address of the VS-88H during the initial configuration

After connecting the Ethernet port, configure your PC as follows:

1. On your desktop, right-click the My Network Places icon.

2. Select Properties.

3. Right-click Local Area Connection Properties.

4. Select Properties.

The Local Area Connection Properties window appears.

5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see

Figure 3).

Figure 3: Local Area Connection Properties Window

1 After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the

“Ethernet Configuration (FC-11) guide.pdf” file in the technical support section on our Web site:

http://www.kramerelectronics.com