User manual

Operating the VS-88H 8x8 HDMI Matrix Switcher
11
7.2.2 Acquire an EDID from Several Sets of Inputs and Outputs
To acquire the EDID for more than one output (for example, OUT 1 to IN 1
and OUT 6 to IN 3), do the following:
1. Turn the VS-88H ON.
2. Connect the required acceptor to the output from which you want to acquire
the EDID.
3. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
4. Press the input button to which the EDID will be copied (for example,
IN 1).
The selected input number flashes on the display.
5. Select the output from which the EDID will be acquired (for example,
OUT 1).
6. Press the IN 1 button.
The IN 1 button ceases to flash.
7. Press the next input button to which the EDID will be copied (for example,
IN 3).
The selected input number flashes on the display.
8. Select the output from which the EDID will be acquired (for example,
OUT 6).
9. Press the IN 3 button.
The IN 3 button ceases to flash.
10. Press the input buttons to which you want to copy the EDID (for example,
IN 1 and IN 3).
11. Make sure that the relevant input numbers flash on the display.
12. Press the EDID button.
The process is complete when the display returns to normal.
7.2.3 Acquire the Default EDID
To reset to the default EDID, do the following:
1. Turn the VS-88H ON.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
3. Press the input button to which the EDID will be copied.
The selected input number flashes on the display.