User manual

Connecting a VS-88H 8x8 HDMI Matrix Switcher
9
6 Connecting a VS-88H 8x8 HDMI Matrix Switcher
To connect the VS-88H 8x8 HDMI Matrix Switcher, as illustrated in the
example in
Figure 2, do the following
1
1. Connect
:
2
2. Connect
up to eight HDMI sources (for example, DVD players) to the
eight INPUT HDMI connectors.
3
3. If required, connect a PC and/or controller to the RS-232 port (see section
the eight OUTPUT HDMI connectors to up to eight HDMI
acceptors (for example, LCD displays with built-in speakers).
7.4) and/or the ETHERNET port (see section 7.5).
4. Connect the power connector to the mains electricity (not shown in
Figure 2).
5. If required, acquire the EDID (see section
7.2)
Press the SELECT IN and OUT buttons to choose which HDMI input to
route to a selected output.
Figure 2: Connecting a VS-88H 8x8 HDMI Matrix Switcher
1 Switch OFF the power on each device before connecting it to your VS-88H. After connecting your VS-88H, switch on its
power and then switch on the power on each device
2 You do not have to connect all the HDMI sources
3 You do not have to connect all the outputs