Instruction Manual

VS-88DVI – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the VS-88DVI 8x8 DVI Matrix Switcher 4
3.2 Using the IR Transmitter 7
4 Installing in a Rack 8
5 Connecting the VS-88DVI 9
6 Operating the VS-88DVI 11
6.1 Routing Inputs to Outputs 11
6.2 Disconnecting the Outputs 11
6.3 Storing and Recalling a Setup 11
6.4 Acquiring the EDID 13
6.5 Connecting the VS-88DVI Using RS-232 15
6.6 Connecting the VS-88DVI Using Ethernet 16
7 Technical Specifications 19
8 Hex Table 20
9 Protocol 2000 21
9.1 Syntax 21
9.2 Instruction Codes 22
Figures
Figure 1: VS-88DVI 8x8 DVI Matrix Switcher Front Panel 5
Figure 2: VS-88DVI 8x8 DVI Matrix Switcher Rear Panel 6
Figure 3: Connecting the VS-88DVI 8x8 DVI Matrix Switcher 10
Figure 4: SELECTOR Buttons 12
Figure 5: Crossed Cable RS-232 Connection 15
Figure 6: Local Area Connection Properties Window 17
Figure 7: Internet Protocol (TCP/IP) Properties Window 17