Instruction Manual

18 VS-88DVI - Operating the VS-88DVI
6.6.2 Connecting the Ethernet Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VS-88DVI to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45 connectors.
6.6.3 Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the Master unit
(Machine # 1) via the Ethernet port to the LAN port of your PC. Use your PC initially
to configure the settings (see Section
6.6).