Instruction Manual

VS-88DVI - Operating the VS-88DVI 13
6.4 Acquiring the EDID
You can acquire the EDID from:
• A single connected output (see Section
6.4.1)
• Several sets of inputs and outputs (see Section
6.4.2)
• The default EDID (see Section
6.4.3)
6.4.1 Acquiring an EDID from a Single Connected Output
To acquire or change the EDID of a new output display:
1. Turn ON the VS-88DVI.
2. Connect the required acceptor to the output from which you want to acquire
the EDID.
3. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
4. Press the IN SELECTOR button to which the EDID is copied.
The selected input number flashes on the display.
5. Select the OUT SELECTOR button from which the EDID is acquired.
6. Press the EDID button.
The process is complete when the display returns to normal.