User Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-81SP 8 x 1 Loudspeaker Switcher
10
2. Set the SETUP DIP-switches on the VS-81SP units as follows (see section
6.3):
• Set the first VS-81SP unit to MACHINE # 1
1
• Set the second VS-81SP unit to MACHINE # 2
1
and set DIP
12 to ON, terminating the RS-485 line
2
Figure 5: Controlling via RS-485
6.3 DIP-switch Settings
Configure the VS-81SP by setting the 12 SETUP DIP-switches (item 7 on
the rear panel), as
Figure 6 and Table 2 define:
Figure 6: SETUP DIP-switches (Factory Default for Stand-Alone MACHINE # 1)
1 See Table 3
2 The RS-485 line must also be terminated at the remote controller. Refer to the remote controller’s user manual for details of
how to terminate the RS-485 line on the remote controller