Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
Figure 1 defines the front panel of the VS-808TP.
Figure 1: VS-808TP 8x8 Twisted Pair Matrix Switcher Front Panel
# Feature Function
1 AUDIO Button Press to display/switch audio status. Press again to display/switch video/RS-232 status
2 MENU Button Press to display the menu. Press again to escape the menu and display video switching
3 Arrow keypad When switching is displayed: press the left (◄) and right (►) arrows to move forward and backward to select
the output of a switched pair. Press the up (▲) and down (▼) arrows to move up or down through available
input channels.
When the menu is displayed: press the up (▲) and down (▼) arrows to move up or down through available
sub-menus. Press the left (◄) and right (►) a rrows to move through parameter values
4 ESC Button When the menu is displayed: press to move up one menu level or press repeatedly to exit the menu.
When audio switching is displayed: press to display video switching
5 ENTER Button When audio switching is displayed: press to accept the selected out/in channels.
When the menu is displayed: press to accept the selected parameter value
6
LCD Readout
IN Display Displays the selected switched inputs
7 OUT Display Displays the selected switched outputs
4
VS-808TP – Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher