Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
VS-808TP - Default Parameters
25
10 Default Parameters
10.1 Default Communication Parameters
RS-232
Baud Rate 9600
Data Bits 8
Stop Bits 1
Parity None
Command Format Hex
Example (Output 1 to Input 1) H01H81H81H81
Ethernet
To reset the IP settings to the factory reset values, power cycle the device while
holding in the Factory Reset button located on the rear panel of the unit
IP Address 192.168.1.39
Subnet mask 255.255.255.0
Default gateway 0.0.0.0
10.2 Default Logon Credentials
Logon Credentials
Name kramer
Password kramer