Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
24
VS-808TP - Technical Specifications
9 Technical Specifications
SIGNAL INPUTS: 8 CAT 5 remote transmitters on RJ-45 connectors
1 local RGBHV WUXGA on a 15-pin HD connector
1 local unbalanced stereo audio on a 3.5mm mini jack
1 local balanced stereo audio on a 5-pin terminal block
1 RS-232 (Data) input/output on a 9-pin D-sub connector
1 RS-485/RS-422 input/output on a 5-pin terminal block
SIGNAL OUTPUTS: 8 CAT 5 remote receivers on RJ-45 connectors
1 local RGBHV WUXGA on a 15-pin HD connector
1 local unbalanced stereo audio on a 3.5mm mini jack
1 local balanced stereo audio on a 5-pin terminal block
CONTROL
INPUTS/OUTPUTS:
1 RS-232 (Control) input on a 9-pin D-sub connector
1 Ethernet LAN on an RJ-45 connector
RESOLUTION (VIDEO): Up to 1920 x 1200 @60Hz (WUXGA) depending on the
transmitter/receiver
VIDEO CONTROL
EQUALIZATION/GAIN
Video quality adjustment is done automatically at every
connection change or can be forced manually via the front
panel
AUDIO GAIN: 0-15 where 0=mute , 01=–25dB and 15=6dB
MAXIMUM CABLE LENGTH: 300m (984ft)
BAUD RATE (RS-232): 9600, 19200, 38400, 115200
POWER CONSUMPTION: 100-240VAC, 50/60Hz, 23VA
DIMENSIONS: 19" x 9.4" x 1U (W, D, H)
WEIGHT: 3kg (6.6lbs) approx
ACCESSORIES: Power cord, rack “ears”