Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
22
VS-808TP - Operating the VS-808TP Remotely via the Web Pages
8.3.3 Port Name Page
The Port Name page allows you to rename the ports. These names appear on the
Connections page (see Section
8.2).
Figure 17: Port Name Page
8.3.4 Data and Audio Processing Page
The Data and Audio Processing page allows you to select either no processing or
for the device to provide data and audio processing.
Figure 18: Data and Audio Processing Page