Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
VS-808TP - Operating the VS-808TP Remotely via the Web Pages
21
For defaults see Section 10.
8.3.1 Web Page
The Web page allows you to:
• Set the IP parameters for the device
• Select the Website timeout. If there is no Web page access during this
period you are automatically logged out
• Enable and disable Telnet access to the device
Figure 15: Web Page
8.3.2 Serial Page
The Serial page allows you to select the:
• Serial port address
• Baud rate
• Serial port mode
Figure 16: Serial Page