Owner manual

VS-808TP - Operating the VS-808TP Remotely via the Web Pages
19
8 Operating the VS-808TP Remotely via the
Web Pages
You can operate the VS-808TP using a standard Web browser over a LAN. The
Web pages are divided into four sections:
• Connections—Controls switching, video gain and compensation, and audio
volume (see Section
8.2)
• Setup—Controls Web, serial, port names, and data and audio processing
(see Section
8.3)
• User Management—Controls user administration (see Section
8.4)
• Firmware—Updating the firmware of the device (see Section
8.5)
8.1 Accessing the VS-808TP Web Pages
To access the VS-808TP Web pages:
1. Open your Internet browser.
2. Enter the IP address of the device (see Section
10) in the address bar of
your browser (see
Figure 13).
Figure 13: Web Browser Address Bar
For the default logon credentials see Section 10.2. We recommend for security
reasons that you change the defaults at first logon.
The main switching control Connections page is displayed which shows a
graphical interpretation of the front panel (see
Figure 14).
After making changes on any of the pages click:
• Submit to save the changes
• Clear to abandon the changes
• Default Setting (if available) to load the default parameters for the page