Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
18
VS-808TP - Operating the VS-808TP Locally via the Front Panel Buttons
7.1.7 Data and Audio Processing Sub-menu
The Data and Audio Processing sub-menu allows you set the processing for the
model of TP transmitter being used.
Parameter Description Options
Processing
Mode
Sets the processing mode for the data and audio
depending on the TP transmitter in use:
Default=TP133/134
Bypass=TP-125/126
Default, Bypass
Default—Default