Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol

VS-808TP - Operating the VS-808TP Locally via the Front Panel Buttons
17
7.1.3 Adjust Video Level Sub-menu
The Video Level sub-menu allows you to adjust the video level of each channel.
Parameter Description
Optimize
Video Output
Port
Video quality adjustment is done automatically at every connection
change or it can be manually forced via the front panel or the Web pages.
For local ports only the gain is adjusted
7.1.4 Adjust Audio Level Sub-menu
The Audio Level sub-menu allows you to adjust the audio level of each channel.
Parameter Description Options
Audio Output Port Selects the audio output to adjust its level 01, 02,03, 04, 05,
06, 07, 08, All,
L (local)
Audio Level Sets the audio level of the selected output
or all outputs
Stored Values: 0-15
where 0 = mute,
01 = -25dB and
15 = 6dB
7.1.5 Save/Load Profile Sub-menu
The Save/Load Profile sub-menu allows you to save and recall switching
configurations.
Parameter Description Options
Load to a Profile
Number
Saves the current configuration to the selected
setup
0 to 15
Call a Saved
Profile Number
Recalls a saved setup to be the current
configuration
0 to 15
7.1.6 Security Mode Sub-menu
The Security Mode sub-menu allows you to set the security access and password
for the device.
Parameter Description Options
Password Required Turns on and off the requirement for a
password to access the menu
Yes, No
Change password Sets the password for access 0000 to 9999










