Owner manual

16
VS-808TP - Operating the VS-808TP Locally via the Front Panel Buttons
7.1.1 Set IP Port Sub-menu
The parameters in the Set IP Port sub-menu set the network IP values and reset
the device. For factory defaults see Section
10.
Parameter Description Options
IP Address Sets the IP network address Any valid IP address
Subnet Mask Sets the IP network mask Any valid subnet mask
Gateway Sets the IP gateway address Any valid gateway address
Default IP Settings Sets the IP settings to the factory default (see Section 10.1)
Save and Reset the Device Saves changes made to settings and resets the device
Exit Without Save Exits without saving any changed settings
7.1.2 Set Serial Port Sub-menu
The parameters in the Serial Port sub-menu set the serial port parameter values.
For factory defaults see Section
10.
Parameter Description Options
Serial Port
Address
Sets the serial
machine number
1 to 16
Baud Rate Sets the serial port
baud rate in bps
9600, 19200, 38400 or 115200
Serial Port Mode Sets the serial port
mode of
communication
RS-232
1. RS-232 (Data): Exchange data with the remote
output acceptors
2. RS-232 (Control): Accept Kramer Protocol 2000
commands to switch the VS-808TP
3. RS-422/485: No function
RS-422/RS-485
1. RS-232 (Data): Exchange data with the remote
output acceptors
2. RS-232 (Control): No function
3. RS-422/485: Accept Kramer Protocol 2000
commands to switch the VS-808TP
BYPASS
1. RS-232 (Data): Exchange data with the remote
output acceptors
2. RS-232 (Control): Accept Kramer Protocol 2000
commands to switch the VS-808TP
3. RS-422/485: No function
Default Serial
Settings
Sets the serial port parameters to the factory default (see Section 10.1)
Save and Reset
the Device
Save any changes to settings and reset the device
Exit Without
Save
Exit without saving and changed settings