Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
VS-808TP - Operating the VS-808TP Locally via the Front Panel Buttons
15
The device then displays the last active video switching configuration, an example
of which is displayed below.
OUTPUT 01 02 03 04 05 06 07 08 L
INPUT 01 02 03 04 05 06 07 08 L
7.1 Using the Menu
The menu is shown on the display when the Menu button is pressed. Pressing
either the Menu button a second time or the Esc button exits the menu.
Navigation through the menu is performed as follows:
• Menu—display the menu or exit the menu
• Up (▲)—scroll up through the sub-menus or parameters, or increase the
selected parameter value
• Down (▼)—scroll down through sub-menus or parameters, or decrease the
selected parameter value
• Right (►)—Move right through the selected parameter value
• Left (◄)—Move left through the selected parameter value
• Enter—Select the indicated sub-menu or parameter
• Esc—Move up one level in the menu or exit the menu
The main menu comprises seven sections:
• Set IP Port (see Section
7.1.1)
• Set Serial Port (see Section
7.1.2)
• Adjust Video Level (see Section
7.1.3)
• Adjust Audio Level (see Section
7.1.4)
• Save/Load Profile (see Section
7.1.5)
• Security Mode (see Section
7.1.6)
• Data and Audio Processing (see Section
7.1.7)