Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
12
VS-808TP - Connecting the VS-808TP
Figure 9: Internet Protocol (TCP/IP) Properties Window
7. Click OK.
6.3.2 Connecting to the Ethernet Port via a Network Switch/Hub
To connect to the Ethernet port on the VS-808TP via a network switch/hub:
• Connect the PC to the Ethernet network switch/hub using a straight through
cable
6.4 Connecting the Balanced/Unbalanced Stereo Audio
Output
This section illustrates how to wire the devices to the balanced audio output:
• A balanced stereo output connection, see
Figure 10
• An unbalanced stereo output connection, see
Figure 11