Owner manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Overview
- 4 Defining the VS-808TP 8x8 Twisted Pair Matrix Switcher
- 5 Installing the VS-808TP in a Rack
- 6 Connecting the VS-808TP
- 7 Operating the VS-808TP Locally via the Front Panel Buttons
- 8 Operating the VS-808TP Remotely via the Web Pages
- 9 Technical Specifications
- 10 Default Parameters
- 11 Kramer Protocol
VS-808TP - Connecting the VS-808TP
7
6 Connecting the VS-808TP
Always switch off the power to any device before connecting it to your
VS-808TP. After connecting your VS-808TP, connect its power and
then switch on the power to the other devices.
Figure 3: Connecting the VS-808TP 8x8 Twisted Pair Matrix Switcher
To connect the VS-808TP as illustrated in the example in Figure 3:
1. For a local video and audio source connect:
A VGA source (for example, the graphics output of a laptop) to the PC
In 15-pin HD (M) connector
i