Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Controlling the VS-44HC

7.3.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through

Cable)

You can connect the Ethernet port of the VS-44HC to the Ethernet port on a

network hub or network router, via a straight-through cable with RJ-45

connectors, as Table 8 defines:

Table 8: Straight-through Cable RJ-45 PINOUT

Side 1 Side 2

PIN Wire Color PIN Wire Color

1 White-orange 1 White-orange

2 Orange 2 Orange

3 White-green 3 White-green

4 Blue 4 Blue

5 White-blue 5 White-blue

6 Green 6 Green

7 White-brown 7 White-brown

8 Brown

7.4 Configuring the Ethernet Port

To configure the ETHERNET port, do the following:

1. Connect the ETHERNET port as described in section 7.3.1.

2. Insert the CD-ROM in the CD-ROM drive, double click the Set

FC11_xx.exe

file and follow the on-screen instructions

Both the Ethernet Configuration Manager and the Virtual Serial Port Manager

are downloaded.

3. Click the appropriate shortcut in the Start menu’s Programs folder. The

Configuration Manager window (see Figure 11) opens.

4. Click the Search button

(or the Action menu’s, Search Board command).

The MAC Address for the found ETHERNET port appears in the Device List.

5. Change the settings according to your network requirements and then click the

Config button (or the Action menu’s, Config command) to apply the settings.

Note that clicking the Config button will alter the IP settings of the

ETHERNET port

1 File names are liable to change from time to time

2 The latest version appears on our Web site at http://www.kramerelectronics.com

3 To automatically search for devices