Owner manual

VS-41H - Overview 7
VS-41H – Overview 7
Figure 2: VS-41H 4x1 HDMI Switcher Rear Panel
# Feature Function
7 INPUT HDMI Connectors Connect to the HDMI sources (from 1 to 4)
8 OUTPUT HDMI Connector Connects to the HDMI acceptor
9 RS-232 9-pin D-sub Connector Connects to a PC or an RS-232 remote controller
10 ETHERNET Connector Connects to a PC, Ethernet controller or network
11 RESET Button Press to reset to the factory default definitions:
First disconnect the power cord and then connect it again while pressing the RESET button. The
unit powers up and loads the factory default definitions into its memory.
IP number − 192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
12 Power Connector with Fuse AC connector enabling power supply to the unit