User guide

8 VS-401USB - Operating the VS-401USB

6 Operating the VS-401USB

You can operate the VS-401USB via the front panel buttons by pressing one of

the four DEVICE SELECT buttons to select a device to switch to the HOST. You

can also use the application software (see

Section 6.1

6.1 The Application Software

) or the RC-IR3 IR remote

control transmitter to operate the VS-401USB.

Use the K-SINGLE control application software to control the VS-401USB via the

Ethernet or RS-232 9-pin D-sub.

The latest version of K-SINGLE and installation instructions can be

downloaded from the Kramer Web site at