Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a Single VS-3232A 32x32 Audio Matrix Switcher
10
6 Connecting a Single VS-3232A 32x32 Audio Matrix Switcher
To connect the VS-3232A as illustrated in the example in Figure 4, do the
following
1
:
1. Connect up to 32 balanced audio sources
2
.
2. Connect up to 32 balanced audio acceptors
2
.
3. Set the DIP-switches (see
Section 7.5
4. If required, connect a PC or controller to the RS-232 port (see
).
Section
7.6.1) or the RS-485 port (see 7.6.2Section ) or the ETHERNET port (see
7.8Section
5. Connect the power cord
3
.
).
If necessary, review and set the system variables, using the MENU function,
and the default setup (UNITY setting) as Section
9 describes.
Figure 4: Connecting the VS-3232A Audio Matrix Switcher
1 Switch OFF the power on each device before connecting it to your VS-3232A
2 You do not have to connect all the inputs and the outputs. In this example only two inputs (two DAT players) and two
outputs (a power amplifier with speakers and a DAT recorder) are connected
3 We recommend that you use only the power cord that is supplied with this machine