Instruction Manual

6
VS-311H - Overview
#
Feature
Function
13
IN HDMI Connectors
Connect to the HDMI sources (from 1 to 3)
14
ETHERNET Connector
Connect to the PC or other Serial Controller
through computer networking
15
FACTORY RESET Button
Press the ETHERNET factory reset button to reset
to the factory default definitions:
IP number  192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
First, disconnect the power and then connect it again
while pressing the RESET button. The unit will power
up and load its memory with the factory default
definitions
16
12V DC
+12V DC connector for powering the unit