Owner's manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VS-2DVA 2x1 DVI / XGA / Audio Switcher
4
Figure 1: VS-2DVA 2x1 DVI / XGA / Audio Switcher
Table 1: Front Panel VS-2DVA 2x1 DVI / XGA
1
/ Audio Switcher Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 DVI Press to select the DVI source (from 1 to 2)
3 XGA
1
Press to select the XGA
1
source (from 1 to 2)
4
SELECTOR Buttons
GANG DVI+XGA
1
Press to toggle between switching the DVI and the
XGA
1
signals in one action or separately
5 OUT Connects to the unbalanced stereo audio acceptor
that corresponds to the XGA
1
output
6
AUDIO-XGA 3.5mm Mini
Jack Connectors
IN Connects to the unbalanced stereo audio source
that corresponds to the XGA
1
source (from 1 to 2)
7 OUTPUT Connects to the XGA
1
acceptor
8
XGA 15-pin HD Connectors
INPUT Connects to the XGA
1
source (from 1 to 2)
9 REMOTE Terminal Block Connector Connects to dry contact switches
10 OUT Connects to the unbalanced stereo audio acceptor
that corresponds to the DVI output
11
AUDIO-DVI 3.5mm Mini
Jack Connectors
IN Connects to the unbalanced stereo audio source
that corresponds to the DVI source (from 1 to 2)
12 OUTPUT Connects to the DVI acceptor
13
DVI Connector
INPUT
2
Connects to the DVI source (from 1 to 2)
14 12V DC +12V DC connector for powering the unit
1 Handles all known computer video resolutions (VGA to UXGA)
2 Does not support High bandwidth Digital Content Protection (HDCP)