User guide

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your Video Matrix Switcher

You can control the VS-162V:

• Using the front panel buttons

• Remotely, by RS-485 or RS-232 serial commands transmitted by

a touch screen system, PC, or other serial controller

• Remotely, from the Kramer RC-IR2 Infrared Remote Control

Transmitter

• An external remote IR receiver (optional), see section

4.1

• Via external dry-contact push buttons

To achieve the best performance:

• Connect only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching,

and elevated noise levels (often associated with low quality

cables)

• Avoid interference from neighboring electrical appliances that

may adversely influence signal quality and position your Kramer

VS-162V in a location free from moisture and away from

excessive sunlight and dust

4 Your Video Matrix Switcher

Figure 1 and Table 1 define the front and rear panels of the VS-162V.