User guide

Contents
iii
Figures
Figure 1: VS-162V 16x16 Video Matrix Switcher 5
Figure 2: DIP-Switch Setup on a Single Machine 9
Figure 3: Configuring the VS-162V for Composite Video (CV) 11
Figure 4: Configuring the VS-162V for s-Video (Y/C) 11
Figure 5: Configuring the VS-162V for YUV (RGB) 12
Figure 6: Configuring the VS-162V for RGBS 12
Figure 7: Configuring a 16x16 YUV (RGB) Switcher with 3 VS-162V Units 14
Figure 8: MACHINE ADDRESS # Designation 15
Figure 9: Configuring a 32x16 Switcher 16
Figure 10: Connecting the 32x32 Switcher 18
Figure 11: Assembling a System of Interconnected Switchers 19
Figure 12: Rear Panel DIP-switches 20
Figure 13: Connecting a PC to 4 VS-162V Units 23
Figure 14: Connecting to a 25-pin PC COM Port without a Null-Modem Adapter 25
Figure 15: RS-485 Connector PINOUT 26
Figure 16: Connecting the RS-485 Connectors between Two VS-162V Units 27
Figure 17: An RS-485 Control Interface Setup 28
Figure 18: Keyboard Extension (EXT. KEYS) Connector 30
Figure 19: Default Startup Status Display Sequence 31
Figure 20: Sequence of MENU Commands 40
Figure 21: Choosing the MTX (SYNC from Matrix) Setting 49
Figure 22: Choosing what to INDICATE 52
Figure 23: Machine Identification 55
Tables
Table 1: Front Panel VS-162V 16x16 Video Matrix Switcher Features 6
Table 2: Quick Reference Operating Guide for a Single Machine 9
Table 3: Standalone Switcher Configuration for CV, Y/C, YUV (RGB) and RGBS 10
Table 4: 16x16 Multi-Channel Configurations 13
Table 5: DIP-switch Definitions 20
Table 6: Machine # DIP-Switch Settings 21
Table 7: Summary of Basic RC-IR2 Setups 53
Table 8: Summary of Basic RC-IR2 Operations 54
Table 9: Technical Specifications of the VS-162V Video Matrix Switcher 59
Table 10: Hex Table for the VS-162V Video Matrix Switcher 60