User guide

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Contents
ii
10 Operating Your Video Matrix Switcher 30
10.1 Startup Display 30
10.2 Using the Front Panel Buttons 31
10.3 Toggling Between the AT ONCE and CONFIRM Modes 32
10.4 Switching 32
10.4.1 Switching One Input to One Output 32
10.4.2 Switching Several Inputs to Several Outputs 33
10.4.3 Switching One Input to All Outputs 34
10.5 Clearing 35
10.5.1 Clearing an Output 35
10.5.2 Clearing Several Outputs 36
10.5.3 Clearing All Outputs 37
10.6 Storing and Recalling Setups 37
10.6.1 Storing Setups 37
10.6.2 Recalling Setups 38
11 MENU Commands 39
11.1 Locking and Unlocking the Front Panel 41
11.2 Choosing the Follow or Breakaway from System Mode 42
11.3 Choosing the Video Format Setting 43
11.4 Setting the MACHINE ADDRESS 44
11.4.1 Changing the Standalone MACHINE ADDRESS to a Large Matrix 45
11.4.2 Changing the Large Matrix MACHINE ADDRESS to Standalone 46
11.4.3 Changing to a Different Large Matrix MACHINE ADDRESS 47
11.5 Choosing the SWITCHING METHOD Setting 48
11.5.1 Understanding the SWITCHING METHOD Settings 48
11.5.2 Configuring a SWITCHING METHOD 50
11.6 Choosing the Extended Keyboard Setting 50
11.7 Setting the STORE/RECALL KEYBOARD Mode 51
11.8 Choosing the INDICATE Setting 51
11.9 Choosing the COMMUNICATION Setting 52
11.10 Setting the IR REMOTE Control 53
11.11 Choosing the AUTO STORE Current SETUP 54
11.12 Identifying the MACHINE 55
11.13 Choosing the Initial RESET 55
12 Upgrading the Flash Memory 56
12.1 Connecting the PC to the RS-232 Port 56
12.2 Upgrading the Firmware 57
13 Technical Specifications 59
14 Communication Protocol 59