Manual

Your Audio-Video Router

The VS-162AVM can be controlled:

• Using the front panel buttons

• Remotely, by RS-485 or RS-232 serial commands transmitted by

a touch screen system, PC, or other serial controller

• Remotely, from the Kramer RC-IR3 Infrared Remote Control

Transmitter

• Via external contact closure push buttons

To achieve the best performance:

• Use only good quality connection cables

• Avoid interference from neighboring electrical appliances that

may adversely influence signal quality and position your Kramer

VS-162AVM away from moisture, excessive sunlight and dust

to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables).

4 Your Audio-Video Router

Figure 1 illustrates the front and rear panels of the VS-162AVM. Table 1

and

Table 2 define the front and rear panels of the unit.

1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com