Manual

MENU Commands
39
39
• Set the video reference on the other video units to the MTX
(SYNC from Matrix) setting
+ -
G
RS-485
+ - G
RS-485
+ -
G
RS-485
Video Reference
EXT (external sync)
Choose OUTkey 2 to configure EXT
SWITCHING METHOD setting
Choose OUTkey 4 to configure
MTX SWITCHING METHOD setting
Choose OUTkey 4 to configure
MTX SWITCHING METHOD setting
IN
IN
IN
Figure 17: Choosing the MTX (SYNC from Matrix) Setting
11.3.2 Configuring a SWITCHING METHOD
To choose a SWITCHING METHOD setting, do the following:
1. Press the MENU button until you reach the SWITCHING METHOD
setting.
The MATRIX display shows the message:
SWITCHING METHOD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
Use OUTkey to configure
1: noVIS 2: EXT 3: INT#1 4:MTX
Current
External
1
3. Press an OUT button from 1, 2, 3 or 4. For example, OUT button # 3 to set
the internal sync configuration.
The TAKE LED flashes and the MATRIX display shows the message:
Press TAKE to configure
from INTERNAL (Input #1)
4. Press the TAKE button.
The displays show the messages:
1 Indicating that the machine is currently set to the external switching method setting