Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating Your VS-162AVM
24
Depending on environmental light conditions, the preview display can be
adjusted with the small black pushbuttons on right of the display. Each
press of the MENU button highlights the BRIGHTNESS, CONTRAST,
SATURATION and SHARPNESS settings (see
Figure 15
). The "+" and "-"
buttons adjust each setting. The preview display can be turned ON or OFF
with the POWER pushbutton.
The display headphone volume is adjusted with the VOLUME knob.
Figure 15: Display Menu
10.3 Using the Front Panel Buttons
You can use the front panel buttons to operate the following functions:
• Switch video/audio signals in the BREAKAWAY or
AUDIO-FOLLOW-VIDEO modes (see section
10.4)
• Choose the AT ONCE or CONFIRM modes (see section
10.5).
You can switch (see section
10.6) and clear (see section 10.7):
• One input to one output
• Several inputs to several outputs
• One input to all outputs
10.4 Choosing the Audio-Follow-Video or Breakaway Mode
You can switch video/audio signals in one of two ways, either
BREAKAWAY or AVF.
To set the BREAKAWAY mode, in which video and audio channels switch
independently, either:
1. Press the VIDEO (for video control only) button.
If the VIDEO button illuminates, all operations and the LCD MATRIX and
STATUS displays relate to video; or