Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a Control Interface
18
adapter (see section 9.1.3) or without a null-modem adapter (see
section
9.1.4 )
Figure 9: Connecting a PC to Four Units
9.1.1 Connecting Two Units with a Null-Modem Adapter
To connect two units, using a null-modem adapter provided with the
machine (default):
1. Connect a flat cable
1
2. On the second unit, set DIP 7 OFF (enabling null-modem adapter use).
between the RS-232 OUT 9-pin D-sub port on the first
unit and the null-modem adapter that attaches to the RS-232 IN 9-pin D-sub
port on the second unit.
1 Straight one-to-one uncrossed connections with at least the 3 wires pins # 2, # 3 and # 5