Owner's manual

Communication Protocols

Command

Short

Form

Description Permission

PROT-VER? Read device protocol version Common

PRST-LST? PLST? Read saved presets list Switch

PRST-RCL PRCL Recall saved preset Switch

PRST-STO PSTO Store current connections to preset Switch

PRST-VID? PVID? Read video connections from saved preset Switch

RESET Reset device Administrator

SIGNAL Valid / Invalid input Switch

SIGNAL? Read if input is valid Switch

SN? Read device serial number End User

VERSION? Read device firmware version End User

VID V Switch Video only Switch

VID? V? Get Video switch state Switch

Note: Not every command listed by the Help command is relevant to every matrix

configuration.

16.2 Protocol 2000

Tables of HEX Codes for Serial Communication (Protocol 2000)

Table 12 lists the Protocol 2000

Table 12: Hex Table (IN 1-16 to OUT 1-16)

hex codes for switching inputs 1 through 16 to

outputs 1 through 16.

OUT

IN 1

IN 2

IN 3

IN 4

IN 5

IN 6

IN 7

1 Full details are available on our Web site at http://www.kramerelectronics.com